English
  • mutu_banner_01

HDPE TRB-115

Chithunzi cha HDPE TRB-115
  • HDPE TRB-115

Kufotokozera Kwachidule:

Marlex Brand

HDPE | Kanema

Zapangidwa ku United States


  • Mtengo:1000-1200 USD/MT
  • Doko:Huangpu / Ningbo / Shanghai / Qingdao
  • MOQ:1 * 40 GP
  • Nambala ya CAS:9002-88-4
  • HS kodi:3901200099
  • Malipiro:TT/LC
    • Tsitsani ngati PDF

    Tsatanetsatane wa Zamalonda

    Kufotokozera

    • Good kuwira bata ndi filimu drawdown.
    • Mphamvu yayikulu komanso kulimba.
    • Kuuma kwabwino kwambiri komanso kulimba kwamphamvu.
    • Mphamvu zong'ambika bwino.

    Mapulogalamu

     • Matumba a T-shirt
    • Pangani matumba
    • Zikwama zamalonda
    • Zingwe za mafakitale
    • Zinyalala zomangira zinyalala

    Zofotokozera

    FDA 21 CFR 177.1520(c) 3.2a. Utoto ungagwiritsidwe ntchito pokhudzana ndi mitundu yonse ya zakudya monga momwe tafotokozera mu Table 1, 21 CFR 176.170 (c) komanso pakagwiritsidwe ntchito BH monga momwe tafotokozera mu Table 2, 21 CFR 176.170 (c).

    Nominal Resin Properties Chingerezi SI Njira
    Sungunulani Index, 190 °C / 2.16 kg - 0.06g/10 min Chithunzi cha ASTM D1238
     HLMI, 190 °C / 21.6 kg - 9.5g/10 min Chithunzi cha ASTM D1238
     Kuchulukana - 0.950g/cm³ Chithunzi cha ASTM D1505
    Ma Nominal Blown Film Properties pa 0.5 mil¹ Chingerezi SI Njira
    Dart 260 g / mil 100 N/mm Chithunzi cha ASTM D1709
    Elmendorf Misozi MD 15g/mil 6 n/mm Chithunzi cha ASTM D1922
    Malingaliro a kampani Elmendorf Tear TD 450g/mil 174 N/mm Chithunzi cha ASTM D1922
    Kulimbitsa Mphamvu pa Break MD 13,000 psi 90 MPa Chithunzi cha ASTM D882
    Kulimbitsa Mphamvu pa Break TD 6,000 psi 41 MPA Chithunzi cha ASTM D882
    Tensile Elongation ku Break MD 260 % 260 % Chithunzi cha ASTM D882
    Tensile Elongation pa Break TD 570% 570% Chithunzi cha ASTM D882
    1% Secant Modulus MD 120,000 psi 827 pa Chithunzi cha ASTM D882
    1% Secant Modulus TD 140,000 psi 965 MPa Chithunzi cha ASTM D882

    Kanema wa 0.5 mil (12.7 micron) wopangidwa pogwiritsa ntchito grooved-feed extruder pamlingo wa 225 lb/h yokhala ndi kutalika kwa phesi la 7 x Die Diameter, 4:1 Blow-Up
    Ratio (BUR), mainchesi 6 kufa m'mimba mwake ndi kusiyana kwa inchi 0.040. Zomwe zafotokozedwa pano zikuyimira zomwe zili pansi
    zinthu zopangira izi, ngakhale kuti filimuyo imatha kusiyanasiyana malinga ndi momwe filimu imawomba. Chifukwa chake, data iyenera
    osagwiritsidwa ntchito pazolinga zapadera.

  • Zam'mbuyo:
  • Ena:

    • Magulu azinthu

    Dinani Enter kuti musake kapena ESC kuti mutseke